top of page

Load data for .300 AAC Blackout + .308 | 180gr | Nosler Partition SP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.300 AAC Blackout + .308 | 180gr | Nosler Partition SP

Load Specifications

Bullet:
.308 | 180gr | Nosler Partition SP
Manufacturer SKU:
16331
Bullet Weight:
180gr | 11.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.260" | 32.0mm
Caliber:
.300 AAC Blackout
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.401" | 10.2mm
Shank Seated Depth:
0.401" | 10.2mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B4114_C348

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 180gr | Nosler Partition SP bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
91%
45513
90%
**99
100%
[Accurate 1680]*
<<locked>>
96%
43947
87%
**59
93%
Accurate 5744
<<locked>>
89%
45179
89%
**65
97%
Accurate No. 11 FS 👍
<<locked>>
89%
44614
88%
**52
99%
Hodgdon LilGun
<<locked>>
84%
44135
87%
**85
100%
IMR 4227
<<locked>>
96%
40872
81%
**13
98%
Lovex D060
<<locked>>
91%
45179
89%
**65
97%
Lovex D063
<<locked>>
87%
43569
86%
**42
97%
Lovex S040
<<locked>>
83%
45063
89%
**83
100%
ReloadSwiss RS 36
<<locked>>
95%
37840
75%
**13
97%
Shooters World Blackout
<<locked>>
87%
43569
86%
**42
97%
Shooters World Buffalo Rifle
<<locked>>
91%
45179
89%
**65
97%
Vihtavuori N110
<<locked>>
94%
44512
88%
**22
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
40292
79%
**44
100%
[Accurate 1680]*
<<locked>>
90%
36622
72%
**67
91%
Accurate 5744
<<locked>>
83%
37768
74%
**67
95%
Accurate No. 11 FS
<<locked>>
83%
37362
74%
**67
98%
Hodgdon LilGun
<<locked>>
81%
39030
77%
**32
100%
IMR 4227
<<locked>>
92%
36506
72%
**50
97%
Lovex D060
<<locked>>
85%
37768
74%
**67
95%
Lovex D063
<<locked>>
81%
36680
72%
**54
95%
Lovex S040
<<locked>>
81%
42076
83%
**54
100%
ReloadSwiss RS 36
<<locked>>
91%
33852
67%
**57
96%
Shooters World Blackout
<<locked>>
81%
36680
72%
**54
95%
Shooters World Buffalo Rifle
<<locked>>
85%
37768
74%
**67
95%
Vihtavuori N110
<<locked>>
90%
38986
77%
**67
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page